Leading 10 typical forklift crashes ， forklift procedure must take notice of these issues ！.

Don't take too lightly the forklift at work. If the operation is not good, there will certainly be serious accidents in mins, and there are many accidents including forklifts.

Case 1: The forklift cargo obstructed the motorist's sight, and the person ahead can not be found, causing a rolling mishap.
Situation 2: In order to keep the balance of the forklift when raising hefty goods, the employees used their body weight as the weight, which practically triggered casualties.
Instance 3: The size of the forklift cargo exceeds the allowable size of the course and holds on the roadside shelf, which practically triggers an mishap.
Instance 4: Forklift is speeding up and rolls over during a turn.
Case 5: The forklift driver did not notice the pedestrian, and the pedestrian did not notice the forklift.
Instance 6: The forklift lifts the workers illegally, the forklift driver does not wear the seat belt, the forklift lifter falls and the chauffeur is squashed when the forklift rolls over.
Situation 7: The forklift motorist did not wear a seat belt and dropped from the automobile when it surrendered and was squashed.
Forklift operation ought to take notice of these matters ：.

Beginning.
1. Prior to starting, observe the environments, and after validating that there are no obstacles that prevent the safety of driving, honk the horn first and then start.
2. For automobiles with hydraulic (air pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) gauge have to be risk-free prior to starting.
3. When the forklift begins with a load, the motorist needs to first validate that the load is secure and trustworthy.
4. The start needs to be slow-moving and stable.

Driving.
1. When driving, the height between the bottom end of the fork and the ground should be maintained 300mm-400mm, and the pole should be tilted backward. .
2. Do not lift the fork too high when driving. When entering and leaving the job website or while driving, beware that there will certainly be no barriers in the sky. When the lots is traveling, the fork should not be raised too high, which will impact the security of the forklift. .
3. After discharging, the fork needs to be decreased to the regular driving position before driving. .
4. When turning, if there are pedestrians or cars nearby, the driving signal must be issued initially. High-speed sharp turns are prohibited. High-speed doglegs will certainly cause the car to shed side stability and tip over. .
5. When the forklift is downhill, it is purely forbidden to switch off the flame and slide, and it is forbidden to brake all of a sudden while driving with lots unless there are unique situations.
6. When the forklift is running, it should comply with the website traffic rules in the manufacturing facility and must keep a particular safety range from the automobile ahead. .
7. When the forklift is running, the tons must remain in the most affordable setting that does not hinder the driving, and the gantry must be appropriately slanted back. The load shall not be raised other than when stacking or packing. .
8. The height of the lots have to not block the vehicle driver's sight. In special scenarios, when the item influences the forward vision, drive at a reduced speed when reversing.
9. It is prohibited to switch on the ramp, nor to drive across the ramp. .
10. The safe driving speed of the forklift in the factory area is 5 km/h, and it should drive safely at a reduced rate when entering the production workshop area. .
11. When the forklift is lifted, lifted or driven, it is prohibited for workers to base on the fork to hold items and play a balancing duty. .
12. If troubles are discovered, they will certainly be repaired and reported in a timely manner, and they will never operate with ailments or hide them.

packing and unloading.
1. When fork-loading items, the range between the two forks ought to be adjusted as required to make the lots of both forks balanced and not manipulated, and one side of the thing need to be against the shelf. .
2. It is restricted to collaborate with a solitary fork or make use of a fork top or pull. In special conditions, safety warning signs have to be set up to advise surrounding pedestrians. .
3. In the process of loading and dumping products, the forklift should be braked with the brake. .
4. The rate of the lorry ought to be sluggish and steady. Be careful not to roll the wheels on the dunnage, so as not to stretch the rolled items and harm people. .
5. When utilizing a fork to fork the goods, the fork needs to be as deep as possible under the load, and it needs to be kept in mind that the fork tip ought to not touch various other goods or things. The load needs to be stabilized with very little back tilt of the gantry to make sure that the load does not move in reverse. The pole can be slanted onward slightly when the load is reduced to enable very easy positioning of the lots and extraction of the forks. .
6. It is forbidden to fork products at broadband and hit difficult things with the fork head. .
7. When the forklift is functioning, it is forbidden for people to stand around the fork, so as to avoid the collapse of the goods and injure individuals. .
8. Overwhelming is restricted, and it is prohibited to utilize forks to raise personnel to engage in high-altitude procedures to avoid high-altitude dropping mishaps. .
9. It is not allowed to make use of the brake inertia to slip, put, round or roll objects. .
10. It is not permitted to utilize forks to choose, turn pallet unload.

Leaving .
1. It is restricted to leave the forklift when the products on the fork are in the air. Before leaving the forklift, you have to discharge the goods Electric Forklift Truck for Warehouse or lower the fork frame.
2. Draw the emergency brake handle to dead or dispirit the parking brake button.
3. The engine is shut off and the power is removed. (Except for special conditions, such as the motorist does not leave the car's view and does not surpass 1 min).
4. Eliminate the trick. .

Forklift Operation Precautions.
1. Before and after the forklift operation, the appearance needs to be checked, and gas, lubing oil and cooling water need to be added.
2. Inspect the safety and security efficiency of beginning, running and braking.
3. Inspect whether the lights and horn signals are full and effective.
4. During the operation of the forklift, examine whether the pressure and temperature are typical.
5. After the forklift is running, the exterior leakage ought to also be checked and the seals ought to be replaced Electric Forklift Truck for Warehouse in time.

Forklift Safety Operation Specifications.
1. You should inspect prior to leaving the auto;.
2. When you run into somebody in front of you throughout driving, you ought to send out a signal at a distance of 5 m;.
3. The driving speed in the factory does not exceed 5 km/h;.
4. When driving, the nadir of the freight must be 0.3 m ~ 0.4 m above the ground;.
5. The turning ought to not be too sharp to prevent the tendency of " cost-free turning";.
6. Running up and down the incline needs to be sluggish and uniform, and no activating the slope is allowed.
7. Do not drive across the gradient. When the slope is above 10%, the vehicle should be driven backwards when declining;.
8. When the forklift employees carry the goods and move on, if they experience huge or heavy goods and most likely to the chauffeur's line of sight, they need to take the reversing workout
.
The "Eight Prohibitions" should be adhered to in the operation.
1. Solitary fork operation is not enabled.
2. It is not permitted to lift the goods for cross country driving.
3. It is not allowed to get the goods by passing on the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and various other hazardous chemicals with forks.
5. It is not enabled to make use of inertia force to get the goods.
6. It is not permitted to use stopping pressure to expatriation round or easy-to-roll objects.
7. It is not enabled to bring individuals to work on the pallet or fork, and it is strictly prohibited to stand under the fork after the fork is elevated.
8. Do not drive side to side on slopes
.
Auto parking is not allowed under the following conditions.
1. Curves, slim roadways, train crossings;.
2. Areas with a longitudinal incline greater than 5%.
3. When there is an challenge on one side of the road, the contrary side of the area with the very same size as the barrier should be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844